These formulas are all similar and can be substitutes depending on the use case:

Plexus MA8105GB   (5-Minute Set)		Maven MMA8105 GB (5-Minute Set)
Plexus MA8110GB  (10-Minute Set)		Maven MMA8110 GB (10-Minute Set)
Plexus MA8120GB  (20-Minute Set)		Maven MMA8120 GB (20-Minute Set)

Key Surfaces (Substrates):

• Raw Metals– Aluminum, Stainless Steel, Raw Steel, etc.

• Coated Metals– Hot Dipped, Galvanized, Electrogalvanized, Powder Coated or E-Coated Metals

• Theromoplastics – ABS ABS Blends, Acrylics, Polymides Nylons, PBT, Polycarbonate, Rigid PVC, TPU

• Composites -DCPP, FRP, Gelcoat, Phenolics, Epoxy Based Composites, RIM

• Properties:

  • Color: Gray
  • Mix Ratio: 1:1
  • Shear Strength: 1,800 -2,400 PSI (12.4 -16.5 MPa)
  • Adhesive: 40,000 – 70,000 cP
  • Activator: 40,000 – 70,000 cP
  • Working Time Min: 8 minutes
  • Working Time Max: 12 minutes
  • Fixture Time Min.: 35 minutes
  • Fixture Time Max: 50 minutes
  • Tensile Strength Max: 3,600 psi (24.8 MPa)
  • Tensile Elongation Max: 20%

  • Its environmental and chemical resistance also works well in marine and humid environments. This product is often used for larger assemblies and for bigger gaps, where a longer set-time is important. This 1:1-ratio formula has an open time of 35 minutes and handling strength can be achieved in 90 to 120 minutes. It gives excellent bond strength along with good toughness and high impact strength. Highly recommended in marine industries and other composite assemblies.

    Please Note: These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively. We advise you use a 50ml or 400ml Dispenser for all respective cartridges. If you do not have one, please check out our Dispensers, all are excellent products and have our it s good seal of approval.

    If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking dispenser adapters, as pictured, that you can use for fast small jobs. But the 400ml cartridges really need to use a 400ml Dispenser, they re just too big to effectively use without the dispenser.

    Chemical Resistance

    Excellent resistant to hydrocarbons, oils, gasoline, kerosene, diesel, acids and bases, salt solutions, briny water, salt water, fresh water

    Susceptible to polar solvents like methanol, ethanol, acetone

    Directions of applications
    Wipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. (For optimum strength, surface preparation for the metals like sandblast, etching is suggested).

    Safety and handling
    Wear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once used keep the containers closed.

    Storage and shelf life
    Store this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℃ will reduce the shelf life.

Size	50ml (1.7 oz), 400ml (13.5 oz), Bulk Pails, Expired Material
Which Kit?s Needed	50ml Cartridge + Nozzle, Starter Hand Plunger Kit, Starter Caulk-Gun Adapter Kit, Starter Dispenser Kit, 400ml Cartridge + Nozzle, Start-Up Dispenser Kit, 1-Quart Kit, 1-Gallon Kit, 10-Gallon Kit, Expired or Nearly Expired 400ml Cartridge + Nozzle