Description

Plexus MA530 (53000 Gray) Non-Sag Gel, 30-Minute MMA Adhesive for Metals & Composites

Plexus  MA530 (53000 Gray) is a Non-Sag UV Stable Gray MMA adhesive with a longer set time of 30 minutes, and longer handling strength time of 45 minutes. It provides excellent chemical and water resistance, Will not fade or degrade under extended UV exposure, and gives a strong bond to most thermoplastics, metals, and composites.

Combined at a 1:1 ratio, MA530 has a working time of 30 minutes and reaches approximately 75% strength in 45 minutes.

If you are looking for White (#53500), it is available but only in full-pallet quantities, click here check out the WHITE formula :

Substitute Materials:

• Maven MMA530 (available in 50ml, 400ml, Quart and Gallon Kits)

• Maven MMA560 (available in 50ml, 400ml, Quart and Gallon Kits)
• Maven MMA590 (available in 50ml, 400ml, Quart and Gallon Kits)
• Araldite 2023 (available in 380ml, and 10-Gallon Kits)

• Recommended for Materials:

  ABS, Acrylics, FRP (fiberglasses), Gelcoats, PVC, Polyesters (including DCPD modified), Styrenics, Urethanes, Vinyl Esters

  Characteristics:

  Room Temperature Cure

  Working Time 30 minutes

  Fixture Time 45 minutes

  Operating Temperature -40°F to 250°F (-40°C to 121°C)

  Gap Filling 0.03 in. – 0.375 in. (0.75 mm – 10 mm)

  Mixed Density 8.19 lbs gal (0.98 g cc)

  Flash Point 51°F (11°C)

  Chemical Resistance:

  Excellent resistance to: Acids and Bases (pH 3-10), Salt Solutions

  Susceptible to: Polar Solvents, Strong Acids and Bases, Hydrocarbons (including gasoline and diesel fuels)