-50%

Araldite 2053-5 & 2053-15 : 5 & 15-minute Acrylic (MMA) Adhesive – Weathering & Aging Resistant, Temperature Resistant Chemical Resistant Toughened & Flexible Cheap

Original price was: $16.99.Current price is: $8.50.
0 reviews
21 people are viewing this right now
Estimated Delivery:
15 - 22 Mar, 2025
Trust Badge
Guaranteed safe & secure checkout

Description

ARALDITE 2053 adhesive ensures durable, reliable bonding for most common substrates even in the harshest conditions. The resulting bond resists aging and fatigue, with an elongation rate of more than 50% and a high resistance to hot and wet environments. By distributing stress uniformly over bonded areas, ARALDITE

2053 adhesive helps maintain physical integrity while enabling lightweight design. With an optimal open time, and virtually no need for pre-treatment, you can achieve faster production cycles and increased throughput. This all-in-one solution can also help you simplify your inventory and processes, including worker training.

Features

  • Excellent resistance to hot and wet conditions
  • Excellent resistance to weathering and environmental aging
  • Excellent resistance to hot cold cycles
  • Exceptional High elongation stretch flexability for a structural adhesive
  • Sets Dries Cures completely underwater, high moisture and high humidity
  • Resistant to sustained temperatures up to 100c 212f
  • Resistaint to temperature spikes up to 200c 400f
  • Making it compatible with e-coating and powder coating processes
  • Excellent bond to a wide range of plastics, composites and metals
  • Minimal surface cleaning, prep, pretreatment needed
      • Max sustained Temp 212f
      • Max Temp Spikes 450f
      • Min Operating Temp 40F -40C
          • Excellent ageing and weathering resistance
          • Thixotropic Gel, Non-Sagging, Non-Dripping, Non-Running
            • Formula-Specific Features

              2053-5

              2053-15

              Set Time (Work Life)

              5 minutes

              15 minutes

              Handling Strength (10%)

              20 minutes

              40 minutes

              Min Temp for Set Cure

              -4F -20C

              -4F -20C

              Max Temp Sustained

              212F 100C

              212F 100C

              Max Temp Spikes

              400F 200C

              400f 200C

              Pretreatment
              The strength and durability of a bonded joint are dependent on proper treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent such as acetone, isopropanol (for plastics) or other proprietary degreasing agents in order to remove all traces of oil, grease and dirt. Low-grade alcohol, gasoline, or paint thinners should never be used. The strongest and most durable joints are obtained by either mechanically abrading or chemically etching (“pickling”) the degreased surfaces. Abrading should be followed by a second degreasing treatment.

              Available in cartridges incorporating mixers and can be applied as ready to use adhesive with the aid of the tool recommended by Huntsman Advanced Materials.

              Applying Using the Adhesive
              This system is available in cartridges incorporating mixers and can be applied as ready to use adhesive with the aid of the tool recommended by Huntsman Advanced Materials. The resin hardener mix may be applied manually or robotically to the pretreated and dry joint surfaces. Huntsman s technical support group can assist the user in the selection of a suitable application method as well as suggest a variety of reputable companies that manufacture and service adhesive dispensing equipment. A layer of adhesive 0.25 mm thick will normally impart the greatest lap shear strength to the joint. The joint components should be assembled and secured in a fixed position as soon as the adhesive has been applied. For more detailed explanations regarding surface preparation and pretreatment, adhesive joint design, and the dual cartridge dispensing system, visit www.aralditeadhesives.com.

              Temperature of application use

              The recommended temperature application (putting it on) range is 50°F to 104°F.

              WARNING! The cure reaction can generate a high amount of heat, it is not recommended to mix large amounts of material at room temperature

              Storage
              ARALDITE 2053-05 Structural Adhesive should be stored in a dry place, in the original sealed containers, at temperatures between 2°C and 8°C (36°F and 46°F). Under these storage conditions, the product has a shelf life of 18 months (from date of manufacture). The product should not be exposed to direct sunlight. The product may be placed at room temperature before use, but the total time at room temperature should not exceed 9 months. Long term exposure above 25°C (77°F) will reduce the shelf life of the product.

              For additional information, consult the Technical Data Sheet (TDS) and Safety Data Sheet (SDS).

              Formula

              5-Minute Set – 2053-5, 15-Minute Set – 2053-15

              Size

              50ml (1.7 oz), 480ml (16.2 oz)

              Which Kit?

              50ml Cartridge, 50ml w/ Hand Plunger, 50ml Dispenser Kit, 480ml Cartridge, 480ml Dispenser Kit, Expired or near expired 50ml, Expired or near expired 480ml

Related products

prousvalues.shop © 2025 All Rights Reserved

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare